| 1. |
To
work over ________ in. dia. shaft |
| |
|
| 2. |
OUTSIDE
DIAMETER
a. ________ in. max or
b. ________ in. ± ________ in. |
| |
|
| 3. |
INSIDE
DIAMETER
a. ________ in. max or
b. ________ in. ± ________ in. |
| |
|
| 4. |
Torque
______ in-lbs. ± ______ in-lbs. at 
= ______°.
Torque ______ in-lbs. ± ______ in-lbs. at
 = ______°.
|
| |
|
| 5. |
Length
of space available ______ in. |
| |
|
| 6. |
Maximum
wound position ______ turns or ______ ° from
free position. |
| |
|
| 7. |
Length
of moment arm (R) ______ in. |
| |
|
| 8. |
Direction
of helix (L, R, or optional.) ________ |
| |
|
| 9. |
Type
of ends:__________________ |
|
| 1. |
Wire
diameter ________ in. |
| |
|
| 2. |
Mean
coil diameter ________ in. |
| |
|
| 3. |
No.
of coils ________. |
| |
|
| 4. |
Rate
________ in-lbs per turn (360°) |
| |
|
| 5. |
= ________° free angle reference |
| |
|
| 1. |
Type
of material: _______________ |
| |
|
| 2. |
Finish:
________________________ |
| |
|
| 3. |
Frequency
of rotation, ______ cycles/sec, and working range,
 = ______°
to = ______°
deflection. |
| |
|
| 4. |
Operating
temp: ________°. |
| |
|
| 5. |
End
user application:____________
______________________________
______________________________
______________________________
|
| |
|
| 6. |
Other:_________________________
______________________________
______________________________
______________________________
|
|
